2x Alto TX212 + 2x TX212S Active Powered Sound System 12" 3000W PA DJ Disco

£1,175.00
£1,175.00
£1,175.00

This bundle consists of 2 x Alto TX212S & 2 x Alto TX212.

Vendor: Alto
SKU: SKU8110
Icon Out of Stock Out Of Stock

This product has been discontinued.

Please find alternative products or check out similar products below.

1 of

The 600-watt TX212 is a bi-amplified 2-way design, with a long-excursion woofer and a 1-inch titanium compression driver in a newly-designed precision horn. This new horn design improves the high-frequency performance and produces a very precise 90˚H X 60˚V radiation pattern—ideal for optimal audience coverage.

600 Watts peak, (300 Watts continuous Class D power)
The newly designed horn delivers greater coverage 90° H x 60° V
The full grille delivers style and provides protection for your investment.
12-inch (305 mm) LF driver, 2-inch (50.8 mm) voice coil
1-inch (25.4 mm) neodymium HF compression driver
Lightweight, portable design for main or wedge monitor operation
Standard speaker pole socket
Bi-amplified design with precision active crossover and EQ
Balanced XLR/TRS with selectable Mic/Line input. XLR Link Output, Contour EQ switch and Ground-Lift switch
Designed and tuned in the USA

Specifications
Power Output: 600 W peak (400 W LF + 200 W HF), 300 W continuous (200 W LF + 100 W HF) Class D power
LF Driver: 12-inch (305 mm) LF driver, 2-inch (50.8 mm) voice coil
HF Driver: 1-inch (25.4 mm) neodymium HF compression driver
Crossover: 2.5 kHz
Maximum: 118 dB at 1m
Frequency Response: (-3dB): 70 Hz – 20 kHz
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High-Frequency +3dB Boost
Connectors: (1) XLR/TRS 1/4” (6.35 mm) combo input, (1) XLR link output, (1) IEC power cable input
Controls: (1) Volume, Power on/off switch, Contour switch, Ground-Lift Switch
Indicators: (2) Power LED (front and rear), Clip limiter LED
Protection: Overload Analog Limiter / Compressor, Thermal Protection
Power Supply: 100V-240V ~ 50/60Hz
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Fuse:100–120V T4AL AC250V, 220–240V T2AL AC250V
Power Consumption: 260 W
Enclosure Construction: Injection-molded polypropylene enclosure, multi-angle for main or monitor applications, metal grille, rubber feet, 2 handles (both sides)
Mounting/Installation: Standard speaker pole socket, Wedge Monitor

Dimensions
602 x 381 x 348 mm

Weight
14.2 kg

 


 

Professional Design. Elegant Style. Sound Investment
There are times when your sound system needs additional low-frequency output and “punch.” For those situations, Alto Professional proudly offer the TX212S powered subwoofer. The TX212S subwoofer extends the bass response of virtually any full-range speaker, relieving that speaker of the difficult task of having to reproduce the low bass frequencies. This creates a system with stunning wide-range response characterised by dramatic, impactful low frequencies and effortless, undistorted mids and highs. The listening audience will hear everything with perfect clarity, from the lowest bass synth tones to the highest percussion bells and everything in between.

Precision Engineered
The TX212S subwoofer features a band-pass design and a rugged, long-excursion woofer mounted in a solidly-braced ported enclosure, computer-optimised for powerful low-frequency performance. The enclosure is made from Medium Density Fiberboard (MDF). This strong, resonant-free material has virtually perfect acoustic characteristics, which ensures that the TX212S subwoofer’s output is always clear and impactful. Cheaper enclosure with flex-prone walls actually rob the speaker of acoustic impact by dissipating the driver’s energy as cabinet vibration. A sturdy braced MDF enclosure doesn’t waste the driver’s motion as cabinet resonance.

Versatile
The strong, clear output is only half the battle. In order for a subwoofer to be part of an ideal speaker system, it must blend seamlessly with the companion speaker. This is where the Alto Professional TX212S subwoofer truly excels like none other in its size category. The TX212S subwoofer features a choice of six selectable DSP output modes so the subwoofer’s frequency response and crossover frequency are perfectly-matched to the speaker that it is being used with. Four of these six output options match the subwoofer perfectly with Alto Professional’s TX2 full-range speakers, while the other two output options give you Hi-Pass or Bypass mode.

Superior Sound You Can Count On
The TX212S features onboard 900-watt amplifier (450 watts continuous) with proprietary limiting circuitry that provides electronic clip, thermal and transducer overload protection, ensuring that the system always sounds clean and clear, no matter how hard it’s pushed.

DSP Output Mode
For precise signal adjustment, TX212S employs Digital Signal Processing (DSP). This feature gives you a cleaner, more accurate sound. The DSP controls EQ, distortion detection/limiting, crossover frequency and signal delay with virtual perfection and without the production variability inherent in analogue filtering. Simply stated, DSP takes an analogue signal, converts it to digital and then performs all the desired modifications and adjustments in the digital realm, where it’s totally free from the inaccuracies and susceptibility to added noise that plague analogue signal processing. DSP is a major reason why Alto Professional subwoofers are so clean, dynamic and versatile.
The DSP Output Mode switch on the rear panel of TX212S toggles between six settings that adjust the delay, crossover frequency and the level of the XLR outputs. This feature optimises your speaker system performance while also simplifying your full-range speaker + subwoofer setup. If you have an Alto Professional TX2 loudspeaker, using the correct setting will allow your loudspeaker and TX212S to be time-aligned, crossed over at the ideal frequency and level-matched. Press the DSP Output Mode switch to select between the following settings:

TX208: Matches TX212S with the Alto Professional TX208 full-range speaker.
TX210: Matches TX212S with the Alto Professional TX210 full-range speaker.
TX212: Matches TX212S with the Alto Professional TX212 full-range speaker.
TX215: Matches TX212S with the Alto Professional TX215 full-range speaker.

High Pass: Employs a 100Hz crossover frequency with no delay or level adjustments. This setting works quite well with
a wide variety of non-Alto Professional speakers.

Bypass: Bypasses the DSP functions (there will be no crossover, delay or level adjustments). This setting is ideal for daisy-chaining subwoofers. Once you have selected a setting, the corresponding LED will be lit.

Please Note:
For the TX208, TX210, TX212 and TX215 options, the system is level-matched when the Volume control for your TX212S and TX2 full-range speaker is set to 0dB (12 o’clock). This simplifies your setup and elevates the overall system performance. If you do not have Alto Professional TX2 full-range speakers, you can still use the first four DSP settings for your existing speakers. Cycle through the six options to find the best sound and then make any level adjustments that are needed.


Features
900 watts of peak power output
High-efficiency Class D amplifier
Transducer: 12-inch with 2-inch high-temperature voice coil
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
XLR outputs, with six discreet DSP output modes for ideal matching with companion full-range speaker
Polarity Reverse switch and Extended LF switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Designed and tuned in the USA


Specification
Output Power: 900 W peak, 450 W continuous
Amplifier: High-efficiency Class D amplifier
Transducer: 12” (305 mm) woofer, 2.5” (63.5 mm) voice coil
Frequency Response: 46 Hz – 115 Hz (- 3 dB)
Frequency Range: 40 Hz – 130 Hz (-10 dB)
Maximum SPL: 126 dB (@ 1 m) 123 dB continuous (dB SPL @ 1 m)
Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
Input Level: Line -4 dBu (nominal)
External Controls: Volume control, DSP output mode switch, polarity-reverse switch, extended low-frequency switch, power switch
Indicators: Signal/clip limiter LED, six DSP output mode LEDs, polarity-reverse LED, extended low-frequency LED, power switch LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Consumption: 450 W Fuse: T4AL AC250V (100–120 V) or T2AL AC250V (220–240 V)
Design Origin: Designed and tuned in the USA
Accessories: TX212S Cover


Dimensions
421 x 403 x 518 mm


Weight
20.1 kg

Delivery & Returns

Free Delivery

This is offered on all products regardless of order value to all mainland UK postcodes. Your purchase will be with you within 3 working days of your order being placed. If you are in the Scottish Highlands, Northern Ireland, Isle of Man and the Channel Isles you will still get free delivery but your order may take up to 5 working days to get to you.

I need my products quickly- can you help?

Absolutely! At check out you can select the option that suits you best.
We offer Next day, Saturday, Pre-10am and Pre-12pm delivery.
Unfortunately these options are not yet available for customers in the Scottish Highliands, Northern Ireland, Isle of Man and the Channel Isles.

When is the cut off for Next day delivery?

If you place your order before 2pm Monday- Friday, we will dispatch the same day.

For more information, including International delivery please click here.

Returns

Our returns department aims to help you as quickly as possible with any issues you may have with your product.

Please click here for more information on returning products.

Recently Viewed Products

Cursor
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00
Example product title
£1,175.00
£1,175.00
£1,175.00