2x Reloop RP-7000MK2 Professional Direct Drive Turntables (Black) inc. RMX-90 DVS Mixer

REL-232554-BUNDLE

2x Reloop RP-7000MK2 Professional Direct Drive Turntables (Black) inc. RMX-90 DVS Mixer

REL-232554-BUNDLE

£1,545.00

This bundle includes:
2x Reloop RP-7000MK2 Professional Direct Drive Turntables (Black)
1x Reloop RMX-90 DVS 4 Channel DJ Mixer

Finance Calculator

OR

Description

With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

NextGen Turntable for professional Club DJs and Turntablists
Power-Torque Direct Drive with precise motor control and stable rotation
Extra-heavy body design with high-rigidity for excellent damping, isolation and sound


Specifications

Turntable
Type: direct-drive turntable
Drive: quartz driven upper-torque direct drive
Motor: 16-pole, 3-phase, brushless motor
Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
Starting torque: 2.8 – 4.5 kg/cm (adjustable)
Adjustable stop time (0.2 - 6 sec.)
Start-up time / change to RPM: <0.2 sec
Wow and flutter: 0.01% WRMS*
S/N ratio: > 55dB (DIN-B)
Brake system: electronic brake

Platter
Material: die cast aluminium
Diameter: 332 mm
Weight: approx. 1.5 kg

Tone arm
Type: universal, static balanced, S-shaped
Effective length: 230 mm
Overhang: 15 mm
Tracking error range: < 3°
Offset Angle: 22°
Stylus Pressure: 0 - 4 g
VTA setting range: 0-6 mm
Useable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)
Anti-skating range: 0 – 3 g
Effective tone arm mass: 12.8 g (incl. headshell)

Connections
1x PHONO/LINE Out (gold-plated), 1x GND earth connection

General
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power consumption: 13 W


Dimensions
458 x 354 x 144.6 mm

Weight
11.7 kg

 


 


Reloop RMX-90 DVS 4 Channel DJ Mixer Description
The Reloop RMX-90 DVS is a 4-channel club mixer with integrated 8 in/8 out audio interface. When developing this mixer, a strong emphasis was placed on clear and powerful sound characteristics. This has been achieved through its fully digital sound architecture and high-resolution 24-bit audio interface. Experienced DJs will be mixing in no time thanks to the intuitive club mixer layout, 3 band EQ (with classic & isolator modes) and per-channel filters.

The RMX-90 DVS unlocks the full version of Serato DJ, including DVS control. Serato’s advanced NoiseMap™ technology combined with the 24-bit USB interface allows for extremely low latency playback and precise record manipulation. Setup is as easy as plug-n-play and DVS can be used immediately after hook-up. The RMX-90 DVS also comes with 2 Serato NoiseMap™ control vinyl records to start spinning instantly.

The RMX-90 DVS complies with the highest quality standards and its construction stands out due to a sturdy build inside the metal housing where the bolted pots have been fixed in. The surface of the RMX-90 DVS is varnished in deep black metallic finish and is both durable and visually appealing.

The RMX-90 DVS combines the advantages of an analogue club mixer with the endless possibilities of the digital vinyl world.

High-Performance Club Mixer for Serato DJ Pro
On-board Serato sound card incl. 2x Serato NoiseMap™ control vinyl
12 Beat FX, channel filters, USB hub & MIDI support


Specifications
Frequency range: 20 Hz - 20 kHz
Inputs: 7x line RCA, 2x phono RCA, 2x mic XLR/jack, USB port
Outputs: master XLR (balanced), master RCA (unbalanced), booth TRS (balanced), rec RCA (unbalanced), headphones 6.3/3.5 mm jacks
EQ range classic at 70 Hz, 1 kHz, 13 kHz: -8 dB/+9 dB
EQ range isolator at 70 Hz, 1 kHz, 13 kHz: -∞ dB (total kill)/+9 dB
EQ range mic at 100 Hz, 10 kHz: -12 dB/+ 12dB


Dimensions
322 x 387 x 107.5 mm


Weight
7 kg

Delivery & Returns

Free Delivery

This is offered on all products regardless of order value to all mainland UK postcodes. Your purchase will be with you within 3 working days of your order being placed.

If you are in the Scottish Highlands, Northern Ireland, Isle of Man and the Channel Isles you will still get free delivery but your order may take up to 5 working days to get to you.

 

I need my products quickly- can you help?

Absolutely!  At check out you can select the option that suits you best.

We offer Next day, Saturday, Pre-10am and Pre-12pm delivery.

Unfortunately these options are not yet available for customers in the Scottish Highliands, Northern Ireland, Isle of Man and the Channel Isles.

 

When is the cut off for Next day delivery?

If you place your order before 2pm Monday- Friday, we will dispatch the same day.

 

For more information, including International delivery please click here.

 

Returns

Our returns department aims to help you as quickly as possible with any issues you may have with your product. 

Please click here for more information on returning products.

 

Reviews

Average 0% (0 reviews)

This product has no reviews yet.