This bundle includes 2x Alto TS315 PA Speakers, 2x Alto TS218S Subwoofers, 2x Satellite Speaker Poles, and 4x 6m Male XLR to Female XLR Cables
The Alto TS315 is the flagship speaker of the new Alto TS3 series of active powered PA speakers. Featuring a 15" woofer and 1.4" tweeter this professional speaker will deliver in any application you'll need it for. Best suited for clubs, bars, mobile DJ's and conference halls, the Alto TS315 is a versatile and powerful speaker that delivers excellent sound. A must buy for anyone looking for a 15" PA speaker!
The all-new Alto Professional TS3 Series of professional loudspeakers deliver solutions for every performance and installation challenge. With 2000 watts of explosive bi-amplified power and newly-designed transducers, these speaker systems deliver truly high-performance audio, without compromise or restriction. Their elegant industrial design, lightweight but rugged construction, versatile mounting/placement application and intuitive user interface achieves a level of excellence and refinement that exceeds expectations.
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Pole-mountable, wedge monitor, bracket installation or flown application with integral M10 suspension points
Integrated 2-channel mixer with dual XLR ¼-inch combo mic/line inputs, independent level controls, XLR Link output, Contour
EQ switch and Ground-Lift switch
Custom engineered high-efficiency class D amplifiers with passive cooling design No fan means the speaker runs cleaner, quieter and has greater long-term reliability
Designed and tuned in the USA
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Crossover: 2 kHz
Maximum SPL: 134 dB peak, 131 dB continuous (dB SPL @ 1 m)
Frequency Response: 5020 kHz (+/- 3 dB)
Frequency Range: 43 Hz22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High-Frequency +3dB Boost
Connectors: (2) XLR/TRS ¼ (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-moulded, polypropylene enclosure, with a perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral
M10 suspension points, Wedge monitor
652 x 421 x 392 mm
The Alto TS218S is a powered subwoofer with 1250W class D power and for maximum sound impact, it can be paired with any full-range speaker system. The TS218S is ideal for mobile DJs, touring musicians and club or bar installation. For those performance situations where additional low-frequency output and punch are required, even beyond the already-impressive bass capability of the TS2 full-range speakers, the new TS2 powered subwoofers are the perfect solution.
1250 watts of peak power output
Custom engineered high-efficiency Class D amplifiers with passive cooling design - no fan means the speaker runs cleaner, quieter and has greater long-term reliability
18-inch high-excursion woofer
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
Polarity Reverse, Full-Range Output and Extended LF controls
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported plywood cabinet
Integrated 35mm speaker pole socket and M10 rigging points
Output Power: 1250 W peak, 625 W continuous
Transducer Low: 18" (457 mm) woofer, 3" (76 mm) voice coil
Frequency Response: 35-95 Hz (-10 dB)
Maximum SPL: 131 dB (@ 1 m)
Connections: (2) XLR+1/4" (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
Input Level: -4 dBu (nominal)
External Controls: Volume control, signal/clip limiter with LED, polarity-reverse switch, high-pass filter bypass switch with LED, extended low-frequency switch with LED, power switch with LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced plywood cabinet; 35 mm mounting pole socket on top panel
Power Connection: Standard IEC cable
Input Voltage: 110-120, 220-240 V AC; 50/60 Hz
Fuse: T6.3AL AC250V (110-120 V) or T3.15AL AC250V (220-240 V)
680 x 525 x 630 mm
Delivery & Returns
This is offered on all products regardless of order value to all mainland UK postcodes. Your purchase will be with you within 3 working days of your order being placed.
If you are in the Scottish Highlands, Northern Ireland, Isle of Man and the Channel Isles you will still get free delivery but your order may take up to 5 working days to get to you.
I need my products quickly- can you help?
Absolutely! At check out you can select the option that suits you best.
We offer Next day, Saturday, Pre-10am and Pre-12pm delivery.
Unfortunately these options are not yet available for customers in the Scottish Highliands, Northern Ireland, Isle of Man and the Channel Isles.
When is the cut off for Next day delivery?
If you place your order before 2pm Monday- Friday, we will dispatch the same day.
Our returns department aims to help you as quickly as possible with any issues you may have with your product.
Average 0% (0 reviews)
This product has no reviews yet.