ADJ Mega Par Profile IR Remote Wireless Infra Red WR Controller

Wireless remote control for a variety of ADJ fixtures.


Specifications
Mega Tri BAR Mega TriPAR Profile
Mega PAR Profile
Mega BAR LED RC
Mega BAR 50 RC
Flat PAR TRI18X
Flat PAR TRI7X
PRO 64B LED RC
PRO 38B RC
Mega Go Par64
Mega Go Bar 50
Mega TRI64 Profile Jelly PAR Profile
Jelly GO PAR

BLACKOUT
Pressing this button will blackout the fixture.

AUTORUN
This button will run an automatic program. You can control the speed of the AutoRun by pressing the SPEED button first and then pressing the “+” and “-” buttons.

PROGRAM SELECTION
This button will let you access one of the seven static colour selections. Pressing this button and then press the “+” or “-” to navigate through the seven programs.

FLASH
This button will activate the strobe effect. You can control the flash rate by pressing the “+” and “-” buttons. Press this button again to exit strobe mode.

SPEED
Press this button and use the “+” & “-” buttons to adjust the speed of the Autorun.

DMX MODE
This button will let you select which DMX mode you want to use. Some fixtures will come with different DMX channel modes. This button will switch between the different modes. Please see your corresponding fixture in this user manual to find out about your DMX modes, values, and traits.

SOUND ACTIVE
This button activates the sound active mode. The sound active mode will not work for outdoor LED lights.

SLAVE
This designates the fixture as a slave fixture in a master/slave configuration.

SET ADDRESS
Press this button to set the DMX address. Press this button first, then press the numbers to set the address. Example: DMX Address 1 Press “S001” DMX Address 245 Press “S245”

R G B
Press either one of these buttons, and then press the “+” and “-” to adjust the brightness.

“+” and “-”
Use these buttons to adjust the flash rate, the speed of the AutoRun, dimming, and program selection.

Dimensions
122 x 64 x 14 mm

Weight
0.041 kg