{"product_id":"bishopsound-bp4k-2-channel-power-amplifier-3000w-rms-bstock","title":"BishopSound BP4k 2 Channel Power Amplifier 3000w RMS *BSTOCK*","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBSTOCK - Some light marks from brief use\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe BP4K is a 2-channel Class D Power Amplifier with 3000 watts RMS of output power. At 4 ohms the BP4k 2 x 1500 watts at 8 ohms and 2 x 1000 watts of power. Professional amplification requires locking powercon input not IEC kettle lead. A fast push-to-make circuit breaker protects the amplifier at the rear mains input.\u003c\/p\u003e \u003cp\u003eClass D amplification ensures a truly powerful sound inside a 1u compact and lightweight unit. With full protection against short-circuiting, overheating, DC voltage, power on\/off transients and soft-start, the BP4k power amp ensures a safe, reliable performance.\u003c\/p\u003e \u003cp\u003eThere are level controls for each channel and the steel chassis housing also includes 2 x XLR inputs and 2 x SpeakOn outputs.\u003c\/p\u003e \u003cp\u003ePower, signal and clip lights reveal the status of each of the 2 channels whilst 4 hi-speed thermally controlled fans draw air in through the front and out at the rear.\u003c\/p\u003e \u003cp\u003eDesigned and engineered in the UK, the BishopSound BP4k includes a number of features to give the best performance for passive speakers.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e2 x 1500 Watts RMS into 4 Ohms\u003cbr\u003e2 x 1000 Watts RMS into 8 Ohms\u003cbr\u003e110v\/240v switchable\u003cbr\u003eIndependent gain on each channel\u003cbr\u003eLight and compact only 5kg in total\u003cbr\u003eFrequency Range: 30Hz - 20kHz ±1 dB\u003cbr\u003eIntelligent fans switch in and out dependent on the heat generation automatically to ensure cool running\u003cbr\u003eLimiters protect the BP4K from damage by moving to protect mode when THD is more than 0.5%\u003cbr\u003eEach of the 2 channels has an independent clip, protection and signal indication.\u003cbr\u003eStrong 1u four-bolt M6 rack ears for easy touring rack installation\u003cbr\u003e2 x XLR balanced Neutrik analogue audio inputs\u003cbr\u003e2 NL4 Neutrik speakON output connectors\u003c\/p\u003e \u003cp\u003eProtection:\u003c\/p\u003e \u003cp\u003eSoft Start\u003cbr\u003eDC\u003cbr\u003eShort Circuit\u003cbr\u003eOverload\u003cbr\u003eDistortion limiting\u003cbr\u003eOverheating\u003cbr\u003eVHF\u003c\/p\u003e \u003cp\u003eDesigned to run down to 200v at which point the amplifier will go into protect mode. As soon as the voltage is restored you can use the amplifier again. This is important if you are running a power amplifier off a generator with an unstable power regulator.\u003c\/p\u003e \u003cp\u003eAlways use a power conditioner with this product for your safety and to protect your expensive PA.\u003c\/p\u003e \u003cp\u003e1U amplifiers must be kept cool! High-speed fans are built-in but the only source of airflow is from the front vents so it is of the utmost importance to check monthly and keep these clean and free from clogging up with dust and dirt.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWeight 5kg\u003cbr\u003eProduct Depth 25cm\u003cbr\u003eProduct Height 5cm\u003cbr\u003eProduct Width 48cm\u003cbr\u003eIntelligent fans Switch in and out dependent on the heat generation automatically\u003cbr\u003eLimiters Protect the BP4K from damage by moving to protect mode when THD is more than 0.5%\u003cbr\u003eLED Each of the 2 channels has an independent clip, protection and signal indication.\u003cbr\u003eSize 1u\u003cbr\u003eInputs 2 x XLR balanced Neutrik analogue audio inputs\u003cbr\u003eOutputs 2 x NL4 Neutrik speakON output connectors\u003cbr\u003ePower Cable Powercon cable included\u003cbr\u003eRMS 3000w\u003c\/p\u003e","brand":"Simply Sound and Lighting","offers":[{"title":"Default Title","offer_id":50379851465024,"sku":"REF6154","price":367.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/9322\/1184\/files\/ae7db1d6-51c1-4ff2-9f7a-34d3d180f7c5.jpg?v=1741588268","url":"https:\/\/www.simplysoundandlighting.co.uk\/de\/products\/bishopsound-bp4k-2-channel-power-amplifier-3000w-rms-bstock","provider":"Simply Sound and Lighting","version":"1.0","type":"link"}