Laserworld Tarm 2.5 Shownet Laser Projector Full Color Whitelight RGB

The tarm 2.5 show laser projector is a full-color whitelight RGB laser systems with full analog colour modulation and diode-only equipment. The guaranteed output power is specified at 2'700 mW after optics.

The tarm 2.5 (ShowNET) units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.
The tarm 2.5 (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The benefits include:

2'700 mW guaranteed output power
a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
pure diode laser
novel method for increasing the beam precision of the single-mode diodes
beautiful colours and good color fading
the tarm 2.5 impresses with a very bright 638 nm single mode red
trim pots for adjusting colour intensity

The tarm two laser has great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of approx. 0.9 mrad (full angle).
It is equipped with a bright red (750 mW / 638 nm), a green (700 mW / 520 nm), and a blue (1'500 mW / 450 nm) diode laser source.

The scanners are very fast with 45 kpps@8° ILDA standard and allow for a maximum scan angle of 45° (@30 kpps). Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210H scanners incl. LAS Turboscan driver with 60 kpps@8° ILDA and a max. scan angle of 60° (@35 kpps).

This show laser light has a switchable scan safety and switches for x-axis and y-axis flip. Colour intensity can be adjusted with trim pots per colour channel.

The housing of the tarm 2.5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 2.5 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.

+ Integrated ShowNET incl. free laser show software

The tarm 2.5 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 2.5 (ShowNET) for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

Hardware features of integrated ShowNET:

X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis)
Color outputs with 8 bit resolution (256 different intensity values per colour channel): red, green, blue, intensity linked to green
DMX512 input and output (non-isolated)
100 Mbit Ethernet port
Flexible IP address setting: static address, DHCP or AutoIP
Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN
standalone operation and DMX IN/OUT via DMX-Adapter
Maximum scan speed ~100.000 points per second
Up to 16 devices can be used in parallel for multiprojector laser shows
Built-in ArtNet-to-DMX converter

Specifications
Guaranteed power at aperture: 2'700 mW
Power Red: 700 mW / 638 nm
Power Green: 750 mW / 520 nm
Power Blue: 1'500 mW / 450 nm
Beam Specifications (full angle): ca. 3.5 mm / <1.0 mrad
Laser Sources: Diode
Laser Class: 4
Operation Modes: ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave
Scanner: 45kpps ILDA 8°
optional CT-6210H with LAS Turboscan: 60kpps ILDA 8°; max. 60°.
Scan Angle max.: max. 45°
Accessories: power cable, manual, key, interlock connector
Power Supply: 85 V - 250 V / AC
Power Consumption: 100 W

Dimensions
220 x 220 x 150mm

Weight
7 kg