2x M-Audio BX8 D3 8" Active Studio Monitors (Bundle 2)

£254.99
£254.99
Vendor: M-Audio
SKU: M8-MOF5-W74Q
Icon Out of Stock Out Of Stock

Monitor Performance Starts with Driver Excellence
A monitor’s drivers are the heart and soul of its performance. Driving the low-end and midrange, BX8-D3’s 8-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX8- D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.

More Than Just an Enclosure
With M-Audio’s BX8-D3, every detail has been meticulously engineered with one goal in mind - to facilitate the freedom to mix with confidence. BX8-D3 monitors have a rear- mounted bass port, meticulously engineered to the exact length and diameter. The result? Deep, defined bass response with maximum bass extension and resolution. When combined with a smoothly-flared port, BX8-D3 monitors markedly reduce theaudibly-intrusive air turbulence that results when bass is played back at high sound pressure levels (SPLs). BX8-D3’s tweeter is mounted in a custom waveguide for reliably accurate dispersion that eliminates unwanted high-frequency “scatter,” whilst ensuring a soundstage that remains consistently wide and stable. For seamless setup and easy-location of the optimum listening position, the BX8-D3’s front-mounted positioning LED shines brightly when you’re located in the perfect listening spot, for uncompromisingly accurate and reliable critical evaluations. Finally, BX8-D3’s iconic design on the front panel—M-Audio’s famous “keyhole” shape—is more than just an attractive look: This special “fastenerless” design ensures so there are no driver attachment screw heads to interfere with the sound coming from our drivers.

High-Current, High Headroom Class A/B Bi-Amplified Power
Efficient and accurate: Driving the BX8-D3 monitors are two Class A/B internal amplifiers that power the woofer and tweeter separately - each optimised for the specific frequency range it handles and engineered to complement the characteristics of its companion driver. A precision-tuned crossover guarantees each driver only handles the frequencies that it produces most efficiently for a sound that is cohesive across the entire frequency spectrum. Play louder with less audible distortion: The BX8-D3 bi-amplified design is a far more efficient and accurate way to power a loudspeaker than using a single full-range amplifier to drive multiple driver elements.

Tailor-Made Sound
At M-Audio, we understand no two listening spaces are the same. Therefore, the BX8- D3 monitors custom tailors your sound to your environment, so you will always experience sonically-true, reassuringly-accurate sound reproduction. Negate problematic bass frequencies and limit the impact of nuisance standing waves thanks to BX8-D3’s special Acoustic Space control for precise adjustment of BX8-D3’s sound output in line with your studio space.

Connectivity Covered
Whatever your needs, the BX8-D3 Studio monitors guarantee to assimilate into your existing setup with ease. Combining conveniently-located, rear-mounted XLR and 1/4- inch balanced inputs, BX8-D3 connects to virtually all studio equipment including audio interfaces, mixers, DJ gear and more.

It’s Far More Than The Sum of Its Parts
M-Audio’s BX8-D3 monitors excel in every way, the rightful successor to the original studio icon. Fusing superb drivers, meticulously engineered enclosures, great-sounding amplifiers, versatile control options and standardized connection facilities, BX8-D3 delivers sound quality you can trust.


Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
1.25” natural silk dome tweeter delivers superb transient details
Computer-optimized tweeter waveguide for precise imaging
Acoustic Space Control to fine-tune low-end response to your room
Optimized rear port for extended low-frequency response
XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
Volume control enables you to dial in the perfect monitor playback level
Wide range 37-22kHz frequency response covers full musical spectrum


Specifications
Type: 2-way near-field studio reference monitors
Lo Frequency Drivers: 8 inch (203 mm) Kevlar curved cone with high-temperature voice coil and damped rubber surround, magnetically shielded
Hi Frequency Drivers: 1.25 inch (32mm) magnetically shielded natural silk dome
Frequency Response: 37Hz – 22kHz
Crossover Frequency: 2.0kHz
Lo frequency Amplifier Power: 80W
Hi frequency Amplifier Power: 70W
Maximum Peak SPL: 114dB SPL - Full Bandwidth Pink Noise Measured
Input Sensitivity: -12dBU
Input Connectors: 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector
Input Impedance: 10kΩ balanced, 20kΩ unbalanced
Polarity: Positive signal at + input produce outward LF cone displacement
Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
Power: Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz Consumption: 150W
Fuse: 220–240V~ T1AL, 250V / 100–120V~ T2AL, 250V
Cabinet: Vinyl-laminated high-acoustic-efficiency MDF


Dimensions
250 x 302 x 384 mm


Weight
10.5 kg (single unit)



Adam Hall ECO2 Studio Monitors Isolation Pads
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.

 
Specifications
Material: High-density acoustic foam
Colour: Charcoal
Setup: 2-layer
Foam density: 38 kg/m


Dimensions
265 x 40 x 330 mm


Weight
0.22 kg

Delivery & Returns

Free Delivery

This is offered on all products regardless of order value to all mainland UK postcodes. Your purchase will be with you within 3 working days of your order being placed. If you are in the Scottish Highlands, Northern Ireland, Isle of Man and the Channel Isles you will still get free delivery but your order may take up to 5 working days to get to you.

I need my products quickly- can you help?

Absolutely! At check out you can select the option that suits you best.
We offer Next day, Saturday, Pre-10am and Pre-12pm delivery.
Unfortunately these options are not yet available for customers in the Scottish Highliands, Northern Ireland, Isle of Man and the Channel Isles.

When is the cut off for Next day delivery?

If you place your order before 2pm Monday- Friday, we will dispatch the same day.

For more information, including International delivery please click here.

Returns

Our returns department aims to help you as quickly as possible with any issues you may have with your product.

Please click here for more information on returning products.

Recently Viewed Products

Cursor
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99
Example product title
£254.99
£254.99