Signet PDA200E Induction Loop Amplifier System

SIGNET PDA200E

Product Information
PDA200E Induction Loop Amplifier System
The PDA200E is a current mode induction loop amplifier with the following features -
Up to 120m 2 coverage-ideal for most applications
Straightforward internal screw connections
Ideal for electrical contractors-no audio connectors
Internal controls avoid user tampering
Wall mounted for permanent installation
Mid-range tone control to improve intelligibility
Alert input & tone generator for door bells, fire alarms etc
Fully automatic compressor-limiter controls output level
Balanced microphone and line level controls
Phantom power on microphone input for electret microphones
100V line input from PA system
Larger coverage from smaller cable due to loop drive
Supplied with full instructions and 'loop fitted' sticker
Additional line and microphone input using Outreach plates (plates are optional)
SigNET's range of Outreach plates give the user more freedom and choice with the location of audio inputs. The system works by connecting the Outreach plates to an amplifier using the 4-core twin twisted cable supplied. The plates can then be fixed in convenient locations and fit onto standard single UK single gang back boxes. Up to 5 Outreach plates can be daisy chained together, using the amplifiers' line level input.

Technical Data
Microphone Input
Impedance Balanced 8kΩ
Unbalanced 5kΩ
Sensitivity -65dB
Line Level Input
Impedance Balanced >
20kΩ
Unbalanced 16kΩ
Sensitivity 0dB
100V Line Input
Impedance >
20kΩ
Sensitivity +40dB
Input Level Control
Line to +3dB
Microphone to +45dB
Tone Control
Frequency 1kHz
Cut -17dB
Boost +17dB
Voltage Input 12Vdc@250mA
Bandwidth 100Hz -5kHz@0dB
Noise <
-67dB
Power Consumption <
80VA
Indicators Power On (Green LED)
Audio In Limit (Red LED)
Loop Drive (Yellow LED)
Compact and Powerful Hearing loop system designed for churches, village halls, schools and all types of venues.

Dimensions
273 x 200 x 77mm

Weight
2.9kg