-
Gravity MA 3D A POP 1 Traveler 3D Arm with Pop FilterDescription: The Traveler Series' Pop Filter with 3D ArmEvery bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when...
- £23.50
- £23.50
- Unit price
- per
-
Gravity MA POP 1 Pop Filter with VARI®-ARMDescription: To make sure your pop filter successfully filters undesired pop noises and clipping, you need to be able to position it perfectly in front of your mouth. This is simple with the Gravity MA POP 1 pop filter, with its large screen diameter,...
- £48.00
- £48.00
- Unit price
- per
-
Gravity MS 431 HB Microphone Stand with Folding Tripod and One-Hand ClutchDescription: The GMS 431 HB is a premium quality microphone stand with thick walled tubing, powder coated finish and 179 cm maximum height. The heavy duty tripod base is made of die-cast zinc for an accurate fit of the ultra strong folding legs of...
- £44.50
- £44.50
- Unit price
- per
-
Gravity MS QC 1 TB Quick Coupler CrownDescription: Featuring a 3/8" male thread the MS QC 1 TB attaches to the Gravity quick coupler stem. The groove and ball locking mechanism makes swapping mic clips, microphones and booms a breeze. The quick coupler crown includes a 5/8" adapter for compatibility with...
- £10.50
- £10.50
- Unit price
- per
-
Gravity SP WMBS 20 B Tilt-and-Swivel Wall Mount for Speakers up to 20kgDescription: Made of powder-coated steel and providing horizontal plus vertical adjustment for precision aiming, this Gravity wall mount supports loudspeakers up to 20 kg. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty...
- £38.50
- £38.50
- Unit price
- per
-
LD Systems CURV 500 CABLE 2 Speaker Cable with Terminal Block 3mDescription: Speaker cable with standard speaker plugs on terminal block 3 m for CURV 500® Specifications: Connector 1 Standard Speaker ConnectorConnector 2 Terminal blockType Speaker CablesCable Length 3 mWeight 0,163 kg
- £20.50
- £20.50
- Unit price
- per
-
LD Systems CURV 500 TS DB Speaker Pole for LDCURV500TSDescription: The CURV 500® TS spacer bar is specially designed for mounting the CURV satellites on the SmartLink adapter on subwoofers and is made of powder-coated steel with an M20 thread at the lower end. It has a steel sleeve with an adjusting screw and...
- £46.50
- £46.50
- Unit price
- per
-
LD Systems DAVE 12 G3 SUB BAG Protective CoverDescription: Protective cover for DAVE12G³ subwoofer. Specifications: Type casesmaterial nyloncolor blackHeight 510mmBroad 440mmdepth 550mmWeight 0.702kg
- £39.00
- £39.00
- Unit price
- per
-
LD Systems DAVE 8 XS W G Front Grilles for DAVE 8 XS Satellites WhiteDescription: White front protection grilles for the satellites of the DAVE8XSW. Supplied with corresponding Velcro (hook and loop, self-adhesive). Specifications: Type Front Cover PlatesColor WhiteWeight 0,348 kg
- £23.00
- £23.00
- Unit price
- per
-
LD Systems STINGER 10 G3 PC Padded Protective CoverDescription: This padded protective sleeve is made from durable, water-resistant 1680D nylon and has an 8mm lining to protect the STINGER® G3 speaker. The handle cut-out is reinforced at the edges and covered by a flap with Velcro. A practical outer pocket offers plenty of space...
- £39.00
- £39.00
- Unit price
- per
-
LD Systems STINGER 10 G3 WMB Swivel Wall & Ceiling MountDescription: With this mounting bracket made of powder-coated steel, Stinger® 10" models can be installed on walls or ceilings. The loudspeaker can be swiveled in the bracket for optimal alignment. Specifications: Type speaker wall bracketmaterial stolesurface powder coatedcolor blackresilience 15kgWeight 1.2kg
- £38.50
- £38.50
- Unit price
- per
-
LD Systems STINGER 10 G3 WMB 1 Tilt & Swivel Wall MountDescription: This heavy duty wall mount for Stinger® 10" models is made of powder-coated steel and provides horizontal plus vertical adjustment for precision aiming. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty...
- £39.50
- £39.50
- Unit price
- per
-
LD Systems STINGER 28 A G3 WMB 1 Tilt/ Swivel Wall Mount for LDEB282AG3Description: This wall bracket makes it possible to precisely position active STINGER® 28 A G3 models. It is made with powder-coated steel, it holds up to 21 kg and it can be precisely positioned both horizontally and vertically. Its swivel range is 160°, the...
- £47.00
- £47.00
- Unit price
- per
-
LD Systems STINGER 12 G3 PC Padded Protective CoverDescription: This padded protective sleeve is made from durable, water-resistant 1680D nylon and has an 8mm lining to protect the STINGER® G3 speaker. The handle cut-out is reinforced at the edges and covered by a flap with Velcro. A practical outer pocket offers plenty of space...
- £46.50
- £46.50
- Unit price
- per
-
LD Systems STINGER 28 G3 PC Padded protective CoverDescription: This slip cover is made of hard wearing water repellent 1680D nylon with 8 mm padding to protect your Stinger® G3 loudspeaker. It features reinforced cutouts with hook-and-loop fastener flaps for easy handle access and an outer pocket to store accessories. Features: Rugged...
- £55.00
- £55.00
- Unit price
- per
-
LD Systems STINGER 28 G3 WMB Swivel Wall & Ceiling MountDescription: Made of powder coated steel, this U-bracket is designed for mounting Stinger® 28 G3 models parallel to walls and ceilings. The loudspeaker can be swivelled for optimum orientation. Specifications:Type Speaker Wall MountMaterial SteelSurface Powder coatedColor BlackMax. load 22 kgWeight 1,5 kg
- £47.00
- £47.00
- Unit price
- per
-
LD Systems STINGER 8 A G3 WMB 1 Tilt & Swivel Wall MountDescription: This extra heavy duty wall mount for active STINGER® 8” models is made of powder-coated steel and provides horizontal plus vertical adjustment for precision aiming. It supports loudspeakers up to 11 kg. Side to side swivel is 160° while down tilt is continuously...
- £40.00
- £40.00
- Unit price
- per
-
LD Systems STINGER 8 G3 PC Padded Protective CoveDescription: This slip cover is made of hard wearing water repellent 1680D nylon with 8 mm padding to protect your STINGER® G3 loudspeaker. It features a reinforced cutout with hook-and-loop fastener flap for easy handle access and an outer pocket to store accessories. Specifications:...
- £33.00
- £33.00
- Unit price
- per
-
LD Systems STINGER 8 G3 WMB 1 Tilt & Swivel Wall Mount for STINGER 8 G3 (Passive)Description: This heavy duty wall mount for Stinger® 8" passive models is made of powder-coated steel and provides horizontal plus vertical adjustment for precision aiming. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy...
- £40.00
- £40.00
- Unit price
- per
-
LD Systems STINGER G3 TMB EasyMount® Bracket for Stinger® 12" and 15"Description: The EasyMount® 3-point bracket allows you to suspend and aim Stinger® 12” and 15” models from trusses. Made of high strength steel with a durable powder coating finish, it mounts instantly and securely to the loudspeaker without the need for tools. The ingenious...
- £113.00
- £113.00
- Unit price
- per
Monday to Friday 8:30 - 17:00
Frequently Asked Questions
What kinds of audio & lighting accessories are available?
▼
You’ll find items such as audio cables, DMX leads, clamps, rigging hardware, protective bags and covers. Each accessory is designed to support reliable connections and secure installation for both lighting and audio equipment.
Why are quality accessories important for my setup?
▼
High-quality accessories ensure your system functions reliably and safely. Poor cables or inadequate mounting can cause signal loss, equipment damage or instability. Choosing fit-for-purpose accessories protects your investment and enhances performance.
Can I mix accessories between audio and lighting categories?
▼
Yes. Many accessories work across both audio and lighting setups. For example, heavy-duty clamps may hold lighting fixtures or speakers. Always check load ratings and compatibility to ensure safe and correct equipment use.
- Choosing a selection results in a full page refresh.
