Audio & Lighting Accessories

This is a brand new Neutrik Speakon to Neutrik Speakon, 40m The cable is high quality, flexible, 2 x 1.5mm in black, and we ONLY use genuine Neutrik NL2FX speakon connectors.

Specification Material: Steel Distance between the fixing pole and the steel structure: 28 cm (11") Maximum load: 20 kg (44 lb) Compatibility with speaker stands: Standard 35-mm-(1.4")-diameter pole Compatibility with speakers: 73-cm-(28.7")-high speakers or smaller (10" and 12" speakers and most 15") Dimensions Dimensions...

A pair of premium speaker stands with air cushioning, auto-lock ratchet system and carry bag  Premium grade speaker stands - engineered to a high standard Air-cushioned system to eliminate sudden drops and ease of use Patented Novopro auto-lock ratchet system for a fast and easy setup All...

Manufactured in Europe to both BGV C1 and CE (2006/42/CE) standards. Designed for the professional user in the event and rental industry, the lifters feature automatic locks for increased safety. The K-1 has 4 foldable legs which slide open, to form a four-legged tripod...

Heavy-duty music stand with collapsable tripod base. FeaturesRobust steel constructionBlack powder coat finishStrong & lightweightDual locking mechanismRubber feet Specification Tube diameter: 20mm Max footprint: 580 x 580mmModel: ST0160315/131014/80/2750 DimensionsCollapsed: 631 x 120 x 80 mm Height (with plate): 955 - 1450 mm Plate: 483 x...

Speaker Stand with integrated LED lighting and RF remote control. SpecificationsHeight adjustment 3.6ft - 6.14ft / 96cm - 180cmLoad Capacity 66lbs/ 27kgUpper shaft tubing 35mmMaterial: Steel + PVCIncludes RF remote, frequency 433.92Mhz22 Dynamic Modes20 Static ColorsDirect Color SelectSpeed AdjustableBrightness adjustmentDemo Program ModeRemote Distance up...

DescriptionLEDJ DMX cables are high quality cables with 3-Pin XLR connectors that are used to run the signal from a lighting control console to dimmers or any other device that requires DMX to operate. A durable, water-resistant PVC jacket protects the inner workings of...

DescriptionRugged PowerCON extension cables manufactured using genuine Neutrik PowerCON connectors fitted to H07RN-F tough rubber sheathed cable suitable for power link connections between audio and lighting equipment. The cable is also fitted with a short length of clear heatshrink ready to accept an identification...

DescriptionA range of multicore adaptors when used in pairs facilitate the transmission of up to four ways of digital audio or DMX via one single shielded CAT5/CAT6/CAT7 cable. Built into rugged steel chassis, the adaptors feature an original Neutrik etherCON NE8FAH RJ45 socket and...

DescriptionProfessional quality cables for the most demanding live and recording situations, where the quality of the audio signal is of the utmost importance.FeaturesPremium dual shielded cable which reduces interference and provides clean signal transferStrain relief connectors Oxygen Free Copper cable High quality plugs offering...

DescriptionThe powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection....

Transport Cover for 2x ES Entertainment System tops, 1x D25 mm pole and cables.

Use time and time againSupplied in packs of 10Cable Tie Material: Nylon (Polyamide)Cable Tie Colour: BlackCable Tie Length: 200mmCable Tie Width: 16mmCable Bundle Diameter Max: 50mmMinimum Loop Tensile StrengthCable Tie Type: Releasable

The Electro-Voice ELX115-CVR PA Speaker Cover is specifically designed to be used with the Electro-Voice ELX115 Pa Speaker. This cover protects your speakers from nicks and scratches and comes with cut out handles for easy portability and transportation. FeaturesSpeaker cover specifically designed to fit...

This Eagle 230V to 110V step-down converter allows any device intended for use in the USA at 110-120Vac to be powered from a 230-240Vac UK mains supply. The converter will operate electrical equipment which is fitted with a USA 2-Pin/3-Pin plug and rated at...

DescriptionThese versatile, rugged transport cases provide robust protection for your equipment and are ideal for event and rental companies. Manufactured from rugged 9mm hexaboard plywood, the protective rack cases utilise a heavy duty aluminium extrusion and premium components to ensure outstanding protection for many...

Description: Touring grade cases from Elumen8 are a professional range of cases made to the highest quality and standards and built to withstand the rigours of the road. Features: Holds 48 x conicals, 96 x bullet pins, R clips and copper hammer or other...

DescriptionA range of replacement chassis speakers suitable for use as woofers in full-range speaker cabinets.FeaturesSpade terminalsSuitable for use with QT series speakersSpecificationsImpedance8 ohms

Case Handle Leather blackFeaturesWith elastic inner stay Nickel-plated mountings SpecificationsProduct type: HandlesType: Strap and Briefcase-type HandlesHandle material: leatherHandle colour: BlackHandle width: 140 mmHandle height: 45 mmFitting material: SteelFitting surface: nickel platedFitting colour: silverMounting holes: 4Mounting hole diameter: 5.1 mmWeight: 0,094 kg

Ideal for bass drum micing, the GMS 3122 HDB is a premium quality microphone stand with thick walled tubing, powder coated finish and 32 cm height. The tripod base is made of die cast zinc while the legs are made of strong and heavy...