Rack Shelves & Drawers

Description: A lightweight and durable open metal rack cabinet designed to mount 19" rack equipment such as amplifiers, mixers, effects units, media players, networking systems and more. It is delivered with a set of wheels and designed to be open at both sides -...

Description: A 19" rack mount brush type cable management panel which allows patch cables connected to the front of network switches to pass through and keep dust out. Made from 1.6mm thick solid metalHigh quality black finishBrush width of 38.5cmFits in a 1U rack...

Description: The ingenious design of the LiteConsole élite laptop shelf means that it can be used in two ways: in angled mode or, by inverting the shelf, in flat mode for also using monitors/lighting fixtures/controllers, etc. The shelf straddles across the width of the élite above...

DescriptionRack brackets for amplifiers, 1 U Material strength: 1.5 mm Material: Steel Color: black Hole spacing attachment: 32 mm Mounting material included 1 U Housing design: 1 U Dimension: Width: 13 cmDepth: 2.2 cmHeight: 4.4 cm Weight: 0.18 kg

Description180mm / 7.09 Deep Rack ShelvesBlack Powder CoatedMaterial: 1.5mm / 16 gauge steelDepth: 181.5mm/7.15Recommended Load Capacity: 15kg / 33.07LbWeight: 1.1kg / 2.43Lb

DescriptionRM-KIT DMA accessory allows to install one or two DMA amplifier units inside standard 19'' rack cabinets. In case of a single amplifier, a blind panel is included to close the empty half rack unit. It also includes a set of brackets for amplifier...

The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This...

U-shaped vent with round holes Ventilation area 88 cm² SpecificationsProduct type: 19" Rack PanelsMaterial: SteelSurface: Powder coatedColour: BlackHeight: 1 UWidth: 19 "Material thickness: 1.5 mmWeight: 0,23 kg

19" bracket for mounting 2x DLD-84, 8.4” LCD Display in 19" rack (2xDLD-84 not included!) Specifications19" bracket for mounting 2x DLD 84 – 8,4 inch LCD displayDimensions(without handle): 37 x 483 x 128Dimensions (with handle): 67 x 483 x 12Colour: Black

Specification 482 mm (19") mounting plate, 1 RS Suitable for rack installation of units incapable of being installed into a rack (e.g. hi-fi components) Version with various mounting holes Black lacquered steel version Support area: 250x433 mm Maximum load: 8 kg

Description Monacor RCP-8703U 3U Blank Panel Rack Flightcase Server 482 mm (19") Rack Panels1.5 mm steel, black plastic coating. Upper and lower edges 8 mm angled in different configurations. Ideally suited for individual compilation of 482 mm (19") systems. Specifications Intended use/capacity rack panel Size 482 mm (19") Rack...

19 "rack panel to mount devices smaller than 1 rack unit SpecificationsSteel Rack Panel2 UnitsBase with holes to use of a variety of devices smaller than 1 unit. Dimensions484x88x190 mm Weight0.4kg

A useful accessory to store your tooling and other things. Safety lock with keys. Specifications19" Rack drawer2 unitsEquipped with locking and keys DimensionsHeight (outer-inner) 889 mm - 728 mmDepth (outer) 221 mm Weight11kg

Rack Stand 12 U Rack stand 12 units high Black finish, drilled tapped for M5 screws 24 screws included Specification Product type: 19" Rack Accessories Material: steel Surface: powder coated Colour: black Rack bar type: with M5 threaded holes Dimensions Height: 12 U Width:...

The LMS Data CAB-MAN-1U is a low cost but highly effective cable management solution for almost any type of wall, floor, server or broadcast enclosure. Manufactured completely from alloy and generously powder-coated, it is the must-have cabinet accessory for both post-installation design and of...

Professional 19 inch drawer with keylock. Suitable for storing gear to transport. Great for hiding away cables/Mics etc. SpecificationBlack powder coating2U Dimensions483 x 350 x 88mm Weight6.7kg