QTX

DescriptionHigh quality resistant coating and rear reflector. Suitable for light sequencers and sound-to-light units.FeaturesHigh quality resistant coating and rear reflectorSpecificationsPower supply230VacANSIR80FittingE27Life (hours)750Rating60W

DescriptionHigh quality resistant coating and rear reflector. Suitable for light sequencers and sound-to-light units.FeaturesHigh quality resistant coating and rear reflectorSpecificationsPower supply230VacANSIR80FittingE27Life (hours)750Rating60W

DescriptionHigh quality resistant coating and rear reflector. Suitable for light sequencers and sound-to-light units.FeaturesHigh quality resistant coating and rear reflectorSpecificationsPower supply230VacANSIR80FittingE27Life (hours)750Rating60W

DescriptionA replacement crossover network for the QTX QR15 (178.213UK) cabinets.FeaturesSpecificationsPower handling : nominal300WCrossover frequency3.5kHzImpedance8ohmsDimensions25 x 115 x 65mmWeight0.1kg

Chassis speakers to replace the main driver in the QTX Sound QR series active cabinets. FeaturesVented magnets Spade terminals Specification Impedance 4 ohms Version:30cm (12"), 200Wrms Power max.:400W Power rms:200W Magnet weight:1.134kg (40oz) Magnet size:20 x 140mm Diameter:30cm (12") Voice coil:52mm (2") Frequency response:45Hz...

A good quality stylus with a high output sensitivity and accurate tracking for use with all turntables. Fits CR2861 cartridge (170.573UK) Dimensions5 x 7 x 3mm Weight0.02kg

4 plastic speaker grille clamps with wood screws.

DescriptionShotgun microphones with battery compartment inside the microphone body. Integral XLRM connector, supplied with lead, clip and foam windshield.FeaturesSwitchable cardioid/hypercardioid polar patternSupplied with hot-shoe camera mountSpecificationsPolar patternCardioid, hypercardioid (switchable)Power supply1.5Vdc (AA battery)ConnectorXLRMFrequency response50Hz-18kHzOutput impedance230 OhmsControls3-way switch: off - cardioid - hypercardioidSensitivity-40dB (±2dB)Output impedance500/1600K? ±30%...

DescriptionSpecial silk dome tweeter ensuring a perfect reproduction of the high frequencies, fitted with a 3cm (1.25") voice coil.FeaturesStrontium magnetAluminium voice coilSpecificationsPower max.80WPower rms40WDiameter110mm (4.5")Frequency response1.5kHz - 22kHzImpedance8 ohmsMagnet weight284g (10 oz)SPL @ 1W/1m95dBVoice coil1.25"Magnet size15 x 70mmØ

Protective, water-resistant, slip-on covers for the QTX Busker series of portable PA systems and direct replacements for the covers provided with the Busker-U series of portable PAs. Made from a hard-wearing fabric with durable seam binding; access holes to the PA’s carrying handles; and...

High-quality fragrance additive that can be mixed with smoke, fog and haze fluids, enhancing their effect with a pleasant aroma when vaporised. Suitable for all makes of smoke, fog and haze machine. SpecificationFragrance: Vanilla1 bottle dilutes in to 5 litres of smoke/fog/haze fluidContents: 20ml

A water based liquid formulated for use with all makes of snow machine. This solution produces the very best snow flakes that can last up to 30% longer than other standard fluids. Specification Completely odourless Non-toxic solution Leaves no oily residue

DescriptionA water-based fluid, formulated to produce authentic-looking snow that can last up to 30% longer than other standard fluids. Suitable for use with all makes of snow machine. FeaturesContains Sodium Laureth Sulfate. Causes skin irritation (H315) Causes serious eye damage (H318)Conforms with REACH EC...

An 18" chassis speaker made from aluminium with a ceramic magnet. Suitable for upgrading the QT series subwoofer.Specification Diameter: 45 cm (18") Frame material: Aluminium Power: max: 900W Power: rms: 450W Frequency response: 42Hz - 3kHz Impedance: 8 ohms SPL @ 1 W /...

A dual channel VHF wireless microphone system with a half-width 1U receiver, 2 beltpack transmitters and 2 neckband headset microphones. Up to 50m range Supplied with batteries and jack lead Note: Maximum of 2 VHF frequencies can be operated in combination Specification Power supply -...

A VHF wireless microphone system with a half-width 1U receiver and a handheld transmitter.SpecificationsUp to 50m rangeBatteries and jack lead suppliedPower supply 10Vac 250mABattery 9V, PP3Output balanced XLR, 6.3 jackS/N ratio 95dBDimensionsTransmitter 270 x 45mmReceiver 45 x 210 x 180mmWeightTransmitter 190gReceiver 573g

Description A superb all round subwoofer suitable for almost all applications from mobile discos, and live performance right through to club install. High power sub cabinet constructed from MDF with hard-wearing carpet covering and coated steel grille. Heavy duty bass drivers are fed via...

A VHF wireless microphone system with a half-width 1U receiver, 1 beltpack transmitter and a neckband headset microphone.SpecificationsUp to 50m rangeBatteries and jack lead suppliedReceiver 10Vac 250mATransmitter 9V, PP3Output Balanced XLR, 6.3 jackS/N 85dBDimensionsTranmitter 205 x 68 x 25mmReceiver 45 x 210 x 180mmWeightTransmitter 76gReceiver...

A VHF wireless microphone system with a half-width 1U receiver, a beltpack transmitter, and a lavalier tie-clip microphone. Up to 50m range Batteries and jack lead supplied Specification Power supply - receiver : 10Vac 250mA (supplied) Battery - beltpack transmitter : 9V, PP3 (supplied)...

A VHF wireless microphone system with a half-width 1U receiver, a beltpack transmitter, and a lavalier tie-clip microphoneSpecificationsUp to 50m rangeBatteries and jack lead suppliedPower supply receiver 10Vac 250mABattery beltpack transmitter 9V, PP3Maximum range 50mOutput connections Balanced XLR, 6.3mm jackS/N ratio >85dBDimensionsTransmitter 205 x...