2x Mackie Thump Sub Go Battery Subwoofer & Thrash 212 Go Battery Speaker Bundle

Description

Go wire free with this Mackie fully battery speaker bundle.

Bundle consists of 2x Mackie Thump Sub Go, 2x Mackie Thrash 212 Go, 2x XLR lead and 2x adjustable height speaker pole.

ThumpSUBGO
Thump Sub GO is battery-powered, so you’re not tied to the nearest plug socket. It runs on dual hot-swappable lithium-ion batteries, with each one providing up to six hours of use. This makes it easy to cover outdoor performances, mobile DJ gigs or venue setups where power distribution is limited. The included GB-200 battery lets you get started straight away, while an additional compartment gives you the option for extended runtime.

Unlike many battery-powered speakers, you don’t have to power down to swap cells. If one battery is running low, just slide it out and replace it while the other keeps the sub running. You also have the option to charge the batteries while they’re installed in the unit or separately using a power cable, giving you multiple ways to keep the system powered throughout a long day.

Solid low-end that’s easy to manage
At the heart of the Thump Sub GO are two 8" custom woofers and a 400W Class-D amplifier. This combination delivers clear, punchy low frequencies without excessive size or weight. With a maximum SPL of 123dB and a frequency range down to 32Hz, it provides enough bottom-end for smaller PA systems, acoustic acts, solo DJs and more intimate stages.

Output modes give you more control over how the bass is delivered. High-pass filtering is applied at 130Hz using a steep Linkwitz-Riley crossover to pair well with full-range speakers. You can also switch to full-range mode when daisy-chaining subs. These settings help maintain clarity and system balance across different speaker setups.

Stream music wirelessly over Bluetooth
With a dedicated Bluetooth audio input, the Thump Sub GO lets you stream music from your phone or tablet directly to the system. This makes it easy to run break music, backing tracks or playlist-based events without plugging in an extra source. Once paired, your device will automatically reconnect when in range and powered on.

Bluetooth is controlled using a single front-panel button, with a blue LED showing when the connection is active. You can also quickly reset the pairing or drop the device if needed. It’s ideal for simple plug-and-play music playback when time and cabling are limited.

Smart routing for flexible setups
Two XLR/TRS combo inputs allow you to connect a range of sources, from mixers to DJ controllers. Outputs can be set to mono-summed or stereo mode, giving you flexibility for both single- and multi-subwoofer configurations. A switchable phase control helps align low-end performance with your top speakers, improving clarity and punch.

You also get full-range and high-pass output modes on the same pair of XLR outputs, depending on the switch setting. This saves space and simplifies setup when combining multiple speakers or subs. LED indicators for battery life, overload and pairing help keep you in control without diving into menus.

Easy to transport and fast to set up
The slim, upright design of the Thump Sub GO makes it easy to carry and place. At just under 19kg with a battery installed, it’s light enough to move around solo, and its vertical orientation takes up minimal space on stage or in a van. The built-in carry handle and wedge-friendly shape mean you can load it in quickly without fuss.

For added stability, the Thump Sub GO features an M20 threaded pole mount on the top panel. This allows you to securely attach compatible loudspeakers, preventing unwanted wobble and keeping your system safe, especially outdoors or on uneven ground. It’s a practical touch that helps you build a portable yet professional system with confidence.

Features
Runs on battery power so you don’t need a mains connection
Delivers up to 12 hours of play time using two batteries
Includes one rechargeable GB-200 battery as standard
Lets you swap batteries without interrupting the audio
Streams music wirelessly using built-in Bluetooth
Connects easily to mixers, controllers or instruments
Switches between stereo or mono output to match your setup
Offers high-pass or full-range outputs for flexible routing
Lets you adjust phase for a better match with other speakers
Shows battery and signal status with easy-to-see LEDs
Features an M20 threaded pole mount for secure speaker placement
Stays compact and light enough to carry with one hand
Specifications
Product Code: ThumpSubGO
Product Name: Mackie Thump Sub GO
Type: Battery-Powered Portable Subwoofer
Woofers: Dual 8-Inch (203 Mm) Custom Drivers
Amplifier Type: Class D, Convection-Cooled
Total Power Output: 400 Watts Peak
Frequency Range: 32 Hz – 152 Hz (–10 dB), 39 Hz – 100 Hz (–3 dB)
Maximum SPL: 123 dB
Inputs: 2x XLR / 1/4" TRS Combo Jacks, Bluetooth 5.4
Outputs: 2x XLR Balanced (Full Range Or High Pass)
Output Modes: Stereo Or Mono
High Pass Filter: 130 Hz –6 dB, 24 dB/Octave
Phase Control: Normal / Invert (180° Polarity Flip)
Bluetooth Version: 5.4, Audio Streaming
Bluetooth Controls: Pairing Button With LED Status
Battery Type: Lithium-Ion, Hot-Swappable
Battery Life: Up To 12 Hours (6 Hours Per Battery)
Battery Capacity: 8880 mAh, 11.1V, 97.68 Wh
Battery Bays: Two Independent Compartments
Charging Time: Approximately 3 Hours
Power Supply: 100–240V~, 50–60 Hz, 75W Switchmode
AC Connector: 3-Pin IEC
LED Indicators: Front LED, Bluetooth Status, Battery Level, Overload
Mounting: Floor Or Stage Only
Speaker Pole Mount: M20 Threaded Socket
Protection: Peak And RMS Limiting, Thermal Shutdown, Overexcursion Filter
Included Battery: 1x GB-200 (Second Battery Optional)
Optional Accessories: GB-200 Battery, ThumpSub GO Cover, SPM400 Mount
Dimensions (H x W x D): 22.0 x 9.8 x 21.0 In / 559 x 249 x 533 Mm
Weight (Without Battery): 40.0 Lb / 18.1 Kg
Weight (With Battery): 41.7 Lb / 18.9 Kg

Mackie Thrash 212 Go

Powerful performance
Equipped with an ultra-efficient 300W Class D amplifier, a 12" high-performance woofer, and a 1" Titanium compression driver, the Thrash212 GO delivers professional sound quality wherever you take it. Experience clear and crisp audio with impressive output that will keep the party going till the next morning. Don't compromise on battery life or performance - this speaker offers both.

Playtime for long parties
With the Mackie Thrash212 GO, you can enjoy up to 10 hours of uninterrupted playtime thanks to its included swappable and rechargeable battery. This means you won't have to worry about your speaker dying in the middle of an event or party. Whether you're hosting a DJ gig that requires fast setup and teardown or an event in a remote location with questionable power, the Thrash212 GO has got you covered.

Bluetooth streaming and pairing
Make the most out of the Thrash212 GO's versatility by pairing your smartphone or computer to it via Bluetooth. This allows you to wirelessly stream your favorite music from your device directly to the speaker. Enjoy the convenience of setting up your sound system anywhere you need it without the hassle of cables. You can even link a second Thrash212 GO wirelessly in stereo for a fully immersive music experience.

Built like a tank
Designed to withstand the rigors of every gig, the Thrash212 GO is built like a tank. Its rugged powder-coated steel grille and rotatable grille badge ensure durability and protection while maintaining a lightweight design for easy portability. Equipped with four handles, loading and transporting the speaker is a breeze. No matter where your music takes you, this speaker is ready to conquer every stage.

Features
Portable loudspeaker with a 12-inch woofer
Highly efficient 300 W Class D amplification for powerful sound
1-inch titanium compression driver for high-frequency energy
Bluetooth streaming for smartphone and computer connectivity
Bluetooth stereo pairing for connecting two Thrash212 GO units
Durable Mackie Built-Like-A-Tank build quality
Lightweight and portable with four handles for easy transport and loading
Rotatable grille badge for consistency when placed horizontally
Tough powder-coated steel grille resists bumps and corrosion
Specifications
Frequency Response (-10 dB): 52 Hz - 20 kHz
Frequency Response (-3 dB): 65 Hz - 20 kHz
Horizontal Coverage: 90°
Vertical Coverage: 60°
Maximum SPL Peak: 125 dB
Monitor Angle: 45°
Low Frequency Transducer: 12 in/305 mm with ferrite
High Frequency Transducer: 1 in/25 mm titanium high frequency driver
Rated Power: 300 watts peak
Low Frequency Power Amplification:
Rated Power: 250 watts peak
Rated THD: <1%
Cooling: Convection
Design: Class D
High Frequency Power Amplification:
Rated Power: 50 watts peak
Rated THD: <1%
Cooling: Convection
Design: Class D
Input Type: 2 x Female XLR - 1/4" balanced, TRS combo jack, and Bluetooth
Mic/Line Impedance: 7.6 kΩ
Combo Jack Impedance: 1 MΩ balanced/7.6 kΩ
Output Type: Male XLR balanced (Thru)
Thru Impedance: 600Ω
Crossover Type:
LF Crossover: Linkwitz-Riley 24 dB/octave
HF Crossover: Linkwitz-Riley 48 dB/octave
Crossover Frequency: 2.4 kHz
Line Input Power: 100 - 120 V, 50/60Hz, 75 W, input current 2A. 220 - 240 V, 50/60 Hz, 75 W, input current 1.2 A
AC Connector: 3-Pin IEC 250 V AC, 10 A male
Power Supply Type: Switching power supply
Input Protection: Peak and RMS limiting, power supply and amplifier thermal protection
Display LEDs: Front LED, Bluetooth Status, Link Statues, Power/Overload, Battery Level
Battery Type: Lithium-ion
Battery Life: Up to 10 hours
Charge Time: 5 hours (no signal), 7 hours (with signal)
Capacity: 12500 mAh
Nominal Voltage: 11.1 V
Watt Hours: 138.75 Wh
Operating Temperature Range: -10 - 40°C/14 - 104°F
Charging Temperature Range: -10 - 45°C/14 - 113°F
Enclosure Design: Asymmetrical
Enclosure Material: Painted polypropylene
Enclosure Finish: Black, textured finish
Grille Material: Perforated metal w/ weather-resistant coating
Grille Finish: Powder-coated black
Handles: 4
Dimensions:
Height: 26.4 in/669 mm
Width: 14.8 in/375 mm
Depth: 12.3 in/313 mm
Weight: 34.7 lb/15.7 kg