81001 JTS E-6 UHF Beltpack Lapel Mic

The JTS Professional E-6 + E-6TB + CM-501 complete wireless microphone system has been based on the hugely successful US-8001D and offers an 80-meter working distance alongside 16 selectable channels and, as always, RF and AF performance are guaranteed. This affordable complete microphone set includes an E-6 receiver alongside an E-6TB belt pack transmitter and a CM-501 lapel microphone and is perfect for theatres, schools, live events, presentations and music venues.

The JTS E-6 is a single channel UHF PLL diversity receiver which comes with 16 selectable preset UHF channels that operate on a carrier frequency of 863 -865 MHz allowing you to connect to a single transmitter with ease. An 80-meter working distance works alongside built-in diversity technology to prevent RF link dropouts; this means you’ll always be connected to the microphone so you can freely walk around while using the system. The E-6 receiver features a tonne of controls which include noise mute and pilot tone controls as well as power on/off and channel select functions and an audio level control so you can get the system working to your exact requirements. The receiver also comes with balanced XLR and unbalanced 6.3mm Jack outputs which let you connect to a wide range of mixers and outboard equipment.

The E-6TB is a UHF bodypack transmitter that is supplied with the CM-501 lavaliere microphone and features a PLL synthesized oscillator type alongside 16 preset selectable channels that operate on a carrier frequency of 863 – 865 MHz. The compact bodypack transmitter comes with a robust, heavy-duty plastic housing which has been built for everyday on-stage use and features an LED display as well as a mini 4P XLR connector and is powered via two AA batteries. The CM-501 lavaliere microphone comes with a smooth frequency response and an extended dynamic range which means you get crystal clear audio every time you use the system.

E-6 Receiver
Preset 16 selectable UHF channels
Single transmitter operation
Diversity technology prevents dropouts in the RF link
PLL synthesized technology
Noise mute and pilot tone squelch
Equipped with both XLR balanced and Ø6.3mm unbalanced outputs
Compact half rack space design

E-6TB Beltpack Microphone
16 Selectable channels
PLL synthesized oscillator type
Powered by 2 AA batteries
Equipped with 4P Mini XLR connector
Compact, heavy-duty plastic housing
LED display

Specifications

E-6 Receiver
Frequency Preparation: PLL Synthesized Control
Carrier Frequency: 863 - 865MHz
S/N Ratio: >105dB(A)
T.H.D.: <0.6% @ 1KHz
Display: LED
Display Contents: Antenna A/B, RF/AF Status Controls: Power On/Off, Channel Selecting, Audio Level
Controls: Power On/Off, Channel Selecting, Audio Level
Audio Output Level: -12dB
Audio Output Impedance: 600Ω
Squelch: Pilot Tone & Noise Mute
Operation Voltage: 12-18 VDC, 150mA
Output Connector: 1 Balanced XLR socket / 1 Unbalanced Ø6.3mm phone jack

E-6TB Beltpack Microphone
Frequency Preparation: PLL Synthesized Control
Carrier Frequency: 863 - 865MHz
RF Outputs: 10mW
Frequency Deviation: ±48KHz
LED Display: Low Battery, Power On / Off
Controls: Power On / Off, Channel Selecting
Output Connector: 4 Pin Mini XLR
Spurious Emissions: < -60dBc
Frequency Response: 50Hz - 16kHz
Battery: 2x 1.5V AA

Dimensions
Receiver: 210 x 40 x 171 mm
Beltpack: Not Specified

Weight
Receiver: Not Specified
Beltpack: Not Specified