Alto TX210 & TX212S Sound System Bundle

This bundle includes 2x Alto TX210, 1x Alto TX212S, and 1x Thor SPS01

Alto TX210
300 Watts peak, (150 Watts continuous Class D power)
The newly designed horn delivers greater coverage 90° H x 60° V
The full grille delivers style and provides protection for your investment.
10-inch (254 mm) LF driver, 1.5-inch (38.1 mm) voice coil
1-inch (25.4 mm) titanium diaphragm HF compression driver
Lightweight, portable design for main or wedge monitor operation
Standard speaker pole socket
Bi-amplified design with precision active crossover and EQ
Balanced XLR Mic/Line input, Link Output and Volume control
Integrated analogue limiter and overload protection circuitry
Designed and tuned in the USA

Specifications
Power Output: 300 W peak (200 W LF + 100 W HF), 150 W continuous (100 W LF + 50 W HF) Class D power
LF Driver: 10-inch (254 mm) LF driver, 1.5-inch (38.1 mm) voice coil
HF Driver: 1-inch (25.4 mm) titanium diaphragm HF compression driver
Crossover: 2.5 kHz
Maximum: 116 dB at 1m
Frequency Response: (-3dB): 75 Hz – 20 kHz
Horn Coverage: 90° H x 60° V nominal
Connectors: (1) XLR balanced input, (1) XLR link output, (1) IEC power cable input
Controls: (1) Volume, Power on/off switch
Indicators: (2) Power LED (front and rear), Clip limiter LED
Protection: Overload Analog Limiter / Compressor, Thermal Protection
Power Supply: 100V-240V ~ 50/60Hz
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Fuse: 100–120V T1.6AL AC250V, 220–240V T800mAL AC250V
Power Consumption: 150 W
Enclosure Construction: Injection-molded polypropylene enclosure, multi-angle for main or monitor applications, metal grille, rubber feet, 1 handle on top
Mounting/Installation: Standard speaker pole socket, Wedge Monitor

Dimensions
462 x 287 x 277 mm

Weight
7.6 kg (Single Unit)

Alto TX212S
Active Subwoofer 12" Powered Bass Bin 900W

Features
900 watts of peak power output
High-efficiency Class D amplifier
Transducer: 12-inch with 2-inch high-temperature voice coil
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
XLR outputs, with six discreet DSP output modes for ideal matching with companion full-range speaker
Polarity Reverse switch and Extended LF switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Designed and tuned in the USA

Specification
Output Power: 900 W peak, 450 W continuous
Amplifier: High-efficiency Class D amplifier
Transducer: 12” (305 mm) woofer, 2.5” (63.5 mm) voice coil
Frequency Response: 46 Hz – 115 Hz (- 3 dB)
Frequency Range: 40 Hz – 130 Hz (-10 dB)
Maximum SPL: 126 dB (@ 1 m) 123 dB continuous (dB SPL @ 1 m)
Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
Input Level: Line -4 dBu (nominal)
External Controls: Volume control, DSP output mode switch, polarity-reverse switch, extended low-frequency switch, power switch
Indicators: Signal/clip limiter LED, six DSP output mode LEDs, polarity-reverse LED, extended low-frequency LED, power switch LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Consumption: 450 W Fuse: T4AL AC250V (100–120 V) or T2AL AC250V (220–240 V)
Design Origin: Designed and tuned in the USA
Accessories: TX212S Cover

Dimensions
421 x 403 x 518 mm

Weight
20.1 kg