DBX DriveRack PA2 Complete Loudspeaker Management System

Description

The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

Provides all the processing you need between your mixer and amplifiers
Latest advancements in dbx’s proprietary AutoEQ and AFS algorithms
New input delay module for delaying the FOH system to the backline
Ethernet control via an Android, iOS, Mac, or Windows device
DriveRack PA2 continues the DriveRack legacy of great-sounding
Powerful, and affordable loudspeaker management processors
dbx Compression
AFS (Advanced Feedback Suppression)
Graphic EQ
8-Band Parametric EQ (adjusted when using the AutoEQ)
Subharmonic Synthesis
Crossover (supports full range, 2-way, and 3-way systems)
8-Band Parametric EQs (used for speaker tunings)
dbx Limiting
Driver Alignment Delays
Product Specifications
Input:  (2) line inputs. (1) RTA Mic input
Input Connectors:  (2) Female XLR line inputs. (1) Female XLR RTA Mic input
Input Type:  Electronically balanced/RF filtered
Input Impedance:  >50 kohm
A/D Converter:  dbx Type IV™ Conversion System
CMRR:  > 45dB
Mic Preamp Phantom Power:  +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN):  < -117dB, 22Hz-22kHz, 150 ohm (RTA)
Output:  (6) Line Outputs
Output Connectors:  Male XLR
Output Type:  Electronically balanced, RF filtered
Output Impedance:  120 Ω
Max Output:  +20dBu
A/D Dynamic Range:  112 dB A-weighted, 110 dB unweighted
Type IV Dynamic Range:  123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
Input Delay Length:  100ms
Alignment Delay:  10ms per channel (60ms total)
Sample Rate:  48kHz
Dynamic Range:  >110 dB A-weighted, >107dB unweighted
THD+Noise:  0.003% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response:  20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk:  < -110 dB, -120dB typical (input-to-output: < -100 dB)
Operating Voltage:  100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
Power Consumption:  22 W
Unit Weight:  5.25 lbs. (2.4 kg)
Shipping Weight:  6.75 lbs. (3.1 kg)
Dimensions:  1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
D/A Dynamic Range:  112 dB A-weighted, 110dB unweighted