FBT Modus 4805LA Active Line Array Speaker, 900W

Description
MODUS is not just another line array in the market. It's the essence of ideas and use of technologies condensed into one focus: the invention of the most flexible sound reinforcement system able to satisfy the broadest applications, from live touring to permanent installation, without compromising quality and expectations. MODUS is a constant curvature line array system comprising two modules, the MODUS 4805LA (5°V) and the MODUS 4820LA (20°V) each one equipped with 4 x 8" neodymium magnet woofers and 4 x 1" (1.7"VC) neodymium magnet HF compression drivers. The system is designed to achieve a very uniform distribution of SPL in the listening area in both large and small venues thanks to its total modularity. The constant curvature overcomes the limitations of line arrays with variable angles which inevitably create unmatched SPL between neighbouring enclosures at high frequencies. The grouping of two ‘classic' array modules in one gives an amazing economic advantage and simplifies the setup of the system. Two subwoofers are available for low frequency extension, both with mechanical suspension hardware to deliver seamless integration. The MODUS 215FSA is a dual 15'' subwoofer with a band-pass design and push-pull configuration, delivering significantly extended low frequency response despite its compact size. It is acoustically designed to support two or three MODUS 4805 or 4820 modules. The MODUS 118FSA is a single 18'' subwoofer with a bass-reflex design and compact dimensions that make it ideal for suspension. Designed to support one or two MODUS 4805LA or 4820LA modules and aesthetically similar to a 4805 module, the sub is capable of very high SPL in relation to its size. It can either be suspended above the line array modules or ground stacked. Additionally, the 118FSA can be used in conjunction with the 215FSA to further extend and reinforce low end performance.

Features
5° vertical dispersion
2 way powered bi-amplified true line array, bass reflex design
4 x 200 mm (8") custom neodymium woofers with 50mm voice coil (2")
4 x 25 mm (1") neodymium compression drivers and 44mm voice coil (1.7")
58Hz – 20Khz frequency response
class D 600 Wrms amplifier for LF
class D 300 Wrms amplifier for HF
High efficiency switching power supply
DSP on board with 8 EQ presets, +/- 5db HF level control for accurate amplitude shading
control panel with XLR input and link, volume, presets, HF level, HP filter, ground-lift
90° horizontal waveguide with near flat wavefront up to 18Khz
18 mm (3/4") birch plywood enclosure, with handles and mechanical hardware for suspension
Mechanical hardware for suspension with 10:1 safety factor


Specification
Configuration:Line Array
Frequency response:58Hz - 20kHz
Low frequency woofer:4x 8
High frequency driver:4x 1
Maximum SPL cont/peak:130/137dB
Dispersion:90 x 20 (HxV)
Input impedance:22kohm
Input connector:XLR with link out
Net Dimension (WxHxD):727 x 510 x 405mm
Net Weight:48kg
Transport Dimension (WxHxD):830 x 620 x 520mm
Transport Weight:58kg
AC Power requirements:640VA
Built-in amplifier LF/HF:600/300w RMS
Built-in amplifier peak LF/HF:1200/600W
Power cord:5m PowerCon True1