Laserworld Tarm 3 Laser, 3'000 mW Professional Laser Effect Unit

Description:

The tarm 3 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 3'000 mW after optics.

The tarm 3 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX and automatic mode.
The tarm 3 comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The benefits include: 

3'000 mW guaranteed output power
a very fast maximum scan speed of 45kpps @ 8° ILDA for graphics projection
high-precision diode arrays provide an excellent beam divergence of less than <0.6 mrad for a low beam diameter
pure diode laser
novel method for increasing the beam precision of the single-mode diodes
beautiful colors and good color fading
the tarm 3 impresses with very bright 637 nm single mode red

The tarm 3 laser has great beam specifications with a diameter of ca. ca. 4.5 mm and a beam divergence of less than <0.6 mrad.
It is equipped with a bright red (1'000 mW / 637 nm), a green (900 mW / 520 nm), and a blue (1'700 mW / 450 nm) diode laser source.

The scanners are very fast with 45kpps @ 8° ILDA standard and allow for a maximum scan angle of 50°. Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210 scanners with 60 kpps@8° ILDA and a max. scan angle of 60°.

This show laser light has a switchable scan safety.

The housing of the tarm 3 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 3 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.

Specifications:

Guaranteed Power at aperture 3'000 mW
Power Red 1'000 mW / 637 nm
Power Green 900 mW / 520 nm
Power Blue 1'700 mW / 450 nm
Beam Specifications* ca. 4.5 mm / <0.6 mrad
Scanner 45kpps @ 8° ILDA; optional: CT-6210 with LAS Turboscan: 60kpps @ 8° ILDA, max. 60°
Max. Scan Angle 50°
Laser Source Diode
Laser Class 4
Operation Modes ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave
Basic Patterns over 120 (layers, tunnels, fences, waves, etc.)
Accessories Incl. waterproof flightcase, power cable, manual, key, interlock connector, full version Showeditor software license included
IP rating IP54
Power Supply 85 V - 250 V / AC, 50/60 Hz
Power Consumption 170 W
Dimensions 320 / 260 / 140 mm
Weight 12.5 kg
EAN / MPN 7640144996932