Martin Audio XP15 Blackline XP 15" 2-Way Powered Loudspeaker 1300W Black

Description:

The XP15 is a self-powered two-way system designed by leading acoustic engineers for indoor portable applications and installations that require powerful performance from a single portable loudspeaker. It features a 15” (380mm)/3” (75mm)voice coil LF drive unit, and a 1” (25mm) exit HF compression driver with a 1.75” (44mm) polyimide diaphragm. With an accurately-defined 80° x 50° coverage pattern, it combines very high output capability with exceptional sonic performance and low frequency impact.

Its Class D amplifier module delivers 1000W LF + 300W HF peak output to the drivers, which are independently protected by RMS and peak limiters. On-board DSP functions are controlled by a rotary encoder interface and multi-function, easy-to-use colour display on the rear panel. DSP features include crossover function, a three-channel mixer with three band EQ on each input channel and a choice of three voicing resets and operating modes for flexible operation without external processing.

The symmetrical, multi-angle enclosure is manufactured from birch and poplar plywood and finished in textured black paint. It is fitted with M8 inserts for eyebolt suspension plus a pole-mount socket with a removable cap. Its cloth-backed protective steel grille is a spring-fit into the sides of the enclosure for easy access to rotate the HF horn.

Features:

High output, self-powered, portable two-way system
1300W of Class D amplification
Global power supply with PFC (Power Factor Correction)
Onboard DSP with rotary control interface
Multi-function display for metering, control and function selection
Three-channel mixer
Three-band channel EQ, plus HPF (Ch1/2)
Independent LF and HF peak and RMS limiters
Three speaker mode and voicing presets
Bluetooth® control and streaming option
Durable plywood enclosure
User-rotatable 80° x 50° HF horn
Vertical and horizontal mounting options
Symmetrical multi-angle enclosure for PA or stage monitor use
Screw-free, cloth-backed steel grille
Integral ergonomic handles
Mounting options include pole-mount, wall bracket and flying inserts

Specifications:

Acoustics
Type: High output, self-powered two-way system
Frequency response55Hz – 20kHz ±3dB
-10dB @ 45Hz
DriversLF: 15” (380mm)/3” (75mm) voice coil ferrite motor system
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
Maximum SPL: 125dB continuous / 131dB peak
Dispersion: 80° H x 50° V (user-rotatable)
Crossover: 2kHz active, 24dB/octave
Audio In/Out
Input connectors: 2 x female XLR/ ¼” jack combo
Mic/line input impedance: 8 kΩ balanced
¼” Jack ts input impedance: 1 MΩ unbalanced
Mix output connector: 1 x male XLR
Mix output impedance: 600Ω balanced
Internal Processing
Input channel EQ: 3-band on each channel plus HPF (Ch1/2)
Speaker EQ: 3 speaker mode/voicing presets
Protection: LF and HF Peak and RMS limiting, amplifier thermal protection
Amplifier Module
Type: 2 channel switch-mode, Class D
Peak output power1300W total
1000W LF, 300W HF
Average efficiency: 89%
Cooling: External convection cooled
Maximum ambient temperature: 35°C (95°F) for full output
Power Supply
TYPE: Switch-mode, fixed frequency with PFC
AC input operating range: 100-240V ~ AC, 50 - 60Hz
Power factor: > 0.98
Nominal power consumption: 550W Max
Mains connector: 3-pin IEC
Physical & Dimensions
Enclosure: Multi-angle birch/poplar ply
Finish: Black textured paint
Protective grille: Black perforated steel with scrim cloth backing
Fittings: 13 x M8 inserts, pole-mount socket, 2 x pocket handles
Dimensions (W) 427mm x (H) 690mm x (D) 407mm
(W) 16.8in x (H) 27.2 x (D) 16.0in
Weight: 26kg (57lbs)