Palmer MACHT 402 19" Stereo Power Amp for Guitar

The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.

Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.

Attention:

The MACHT 402 is unsuitable for direct connection to a guitar. Please include a preamp, modeller or an effect pedal in between.

Features
Stereo guitar power amplifier
200 watts per channel into 4 ohms
400 watts bridged for mono use
Carefully tailored, guitar-specific EQ
Input sensitivity selector for use with preamps, pedals etc.
Built-in limiter
All major protections
Works with virtually any cabinet(s)

Specifications
Product type: Guitar Amplifiers
Rated ouput power (1kHz @ 4 Ohms): 2 x 200 W
Rated ouput power (1kHz @ 8 Ohms): 2 x 100 W
Rated ouput power (1kHz @ 8 Ohms, bridged): 400 W
Output circuitry: Class D
Frequency response: 20 - 20000 Hz
Total Harmonic Distortion (THD): < 0.1 %
Gain: 32 dB / 26 dB / 28 dB
Input sensitivity: 0,68 V / 1,4 V / 1,2 V
Protection circuits: DC, over-current, short circuit, soft start, thermal overload
Controls: ground lift, high, limiter, low, Mode, On / Off, Sensitivity, volume
Indicators: clip, Mode, Power, Protect (protection circuit engaged), Signal
Line inputs: 2
Line input connectors: 6.3 mm jack, RCA
Loudspeaker outputs: 2
Speaker output connections: 6.3 mm jack, Speakon compatible
Cooling: low-noise fan
Operating voltage: Switching power supply, 115 V AC / 230 V AC (switchable)
Power consumption @ full load: 470 W
Operating voltage: Switching power supply, 115 V AC / 230 V AC (switchable)
Width: 482 mm
Height: 44 mm
Depth: 244 mm
Weight: 3,8 kg