RCF ART 745-A MK5 15" Active Two-Way Speaker 1400W

£1,345.00
£1,345.00
The ART 745-A MK5 is the flagship speaker in its category. The titanium dome, 4.0” voice coil neodymium compression driver offers a unique vocal clarity and sound projection.
Vendor: RCF
SKU: 13000827
Icon In Stock In Stock

Description:

The ART 745-A MK5 is the flagship speaker in its category. The titanium dome, 4.0” voice coil neodymium compression driver offers a unique vocal clarity and sound projection. The 15” neodymium woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections

Powerful Class D Amplifiers
RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. ART 7 amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the ART 7 amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.
Legendary Transducers
Superior Compression Drivers
The ND940 Compression Driver in pure Titanium with a 4 inches voice coil allows a crossover point at only 650 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.
Potent Woofer
The low-frequency transducer is a high-power 15’’ neodymium woofer with a 3.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.
Experience The Depths of Sound
XBoost unlocks the profound low frequencies concealed within ART speakers. With a simple activation from the speaker's rear panel, immerse yourself in a rich tapestry of bass that pounds with exceptional clarity and control. Whether you're seeking subtle background music or an enriched sonic experience for your mix, XBoost delivers an astonishing perception of deepened bass, ensuring that every note retains its pristine essence and keeping the woofer excursion under control.
Your Ideal Stage Partner
The ART 7 speakers are the perfect choice for musicians and sound provider alike. Their cabinets are molded from a proprietary polypropylene composite engineered to quell vibrations, even at the highest volume levels. This translates to exceptional reliability and resilience under rigorous stage conditions.
New perspective on linearity
RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.
Bring ART With You
The sturdy, ergonomic cabinet is easy to carry, thanks to either the handle at the top or the practical handles on both sides. The base of each speaker includes a steel pole socket for mounting on a stand or on a subwoofer pole. Stability and safety are assured. The rear of the cabinet is shaped to also be used as a floor monitor. Internal reinforcement prevents any deformation of the cabinet.
Features:

133 dB Max SPL
1400 WATT 2-way peak power
90° x 60°, Wide dispersion constant directivity horn
Innovative DSP Processing
4" Compression Neodymium Driver with Titanium diaphragm
15" Neodymium Woofer
FiRPHASE Technology
XBOOST Low Frequencies Enhancer
Specifications:

ACOUSTICAL SPECIFICATIONS
Frequency Response: 45 Hz ÷ 20000 Hz
Max SPL @ 1m: 133 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
TRANSDUCERS
Compression Driver: 1 x 1.0'' neo, 4.0'' v.c
Woofer: 15'' neo, 3.5'' v.c
INPUT/OUTPUT SECTION
Input signal: bal/unbal
Input connectors: XLR, Jack
Output connectors: XLR
Input sensitivity: -2 dBu/+4 dBu
Mic. Input Sensitivity: -32 dBu
PROCESSOR SECTION
Crossover Frequencies: 650
Protections: Thermal, RMS
Limiter: Soft Limiter
Controls: Volume, Boost, MIC/Line
POWER SECTION
Total Power: 1400 W Peak
High frequencies: 400 W Peak
Low frequencies: 1000 W Peak
Cooling: Convection
Connections: VDE
STANDARD COMPLIANCE
Safety agency: CE compliant
PHYSICAL SPECIFICATIONS
Cabinet/Case Material: PP Composite
Hardware: 2 x M10
Handles: 1 on top, 1 each side
Pole mount/Cap: Yes
Grille: Steel
Color: Black
SIZE
Height: 708 mm / 27.87 inches
Width: 437 mm / 17.2 inches
Depth: 389 mm / 15.31 inches
Weight: 18.8 kg / 41.45 lbs
SHIPPING INFORMATION
Package Height: 750 mm / 29.53 inches
Package Width: 500 mm / 19.69 inches
Package Depth: 440 mm / 17.32 inches
Package Weight: 22 kg / 48.5 lbs

Delivery & Returns

Free Delivery

This is offered on all products regardless of order value to all mainland UK postcodes. Your purchase will be with you within 3 working days of your order being placed. If you are in the Scottish Highlands, Northern Ireland, Isle of Man and the Channel Isles you will still get free delivery but your order may take up to 5 working days to get to you.

I need my products quickly- can you help?

Absolutely! At check out you can select the option that suits you best.
We offer Next day, Saturday, Pre-10am and Pre-12pm delivery.
Unfortunately these options are not yet available for customers in the Scottish Highliands, Northern Ireland, Isle of Man and the Channel Isles.

When is the cut off for Next day delivery?

If you place your order before 2pm Monday- Friday, we will dispatch the same day.

For more information, including International delivery please click here.

Returns

Our returns department aims to help you as quickly as possible with any issues you may have with your product.

Please click here for more information on returning products.

Related Products