Audio Technica 2000 Series Wireless Handheld System - T220c Capsule

Description

ATW-R2100c receiver and ATW-T220c handheld cardioid dynamic microphone/transmitter.

The ATW-R2100c receiver features true diversity reception. Two antennas feed two completely independent RF sections on the same frequency; automatic logic circuitry continuously compares and selects the superior received signal, providing better sound quality and reducing the possibility of interference and dropouts. The receiver also offers a switchable output attenuator to reduce the level of the output signal by 12 dB for flexible use with a variety of system configurations. Switchable antenna power is also provided. Soft-touch controls provide convenient access to selection of operating frequency and automatic scanning, while an LCD information display provides constant monitoring of system operation. The receiver is half-width for a standard 1U 19" rack mount; rack-mount adapters are included. Two receivers can be mounted side by side, using an optional AT8630 joining-plate kit.

The ATW-T220c handheld dynamic microphone/transmitter features the same element used in the PRO 41 dynamic handheld microphone created for professional live-sound venues. It also offers switchable high/low RF power. Both the ATW-T210c UniPak® and ATW-T220c handheld transmitters also offer charging contacts so the units can be placed in an optional recharging station for multi-transmitter charging.

Automatic logic circuitry continuously compares and selects the superior received signal, providing better sound quality and reducing the possibility of interference and dropouts
Switchable output attenuator to reduce the level of the output signal by 12 dB for flexible use with a variety of system configurations
Soft-touch controls provide convenient access to selection of operating frequency and automatic scanning
LCD information display provides constant monitoring of system operation
Half-width for a standard 1U 19" rack mount; rack-mount adapters are included
Includes ATW-R2100c receiver and ATW-T220c handheld microphone

Overall System
Operating Frequencies:
UHF Band D: 656.125 to 678.500 MHz DISCONTINUED IN NORTH AMERICA
Band I : 487.125 to 506.500 MHz
Modulation Mode: FM
Maximum Deviation: ±40 kHz
Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)
Operating Range: 100 m (300\'), typical Open range environment with no interfering signals.
Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
Operating Temperature Range:
5º C to 45º C
41º F to 113º F
Battery and LCD performance may be reduced at very low temperatures.
Number Of Channels: 10 total
Handheld Transmitter
RF Power Output:
High: 30 mW;
Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Microphone Element: Dynamic cardioid
Battery Type: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2
Battery Life: High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 232.0 mm (9.13") long, 48.0 mm (1.89") diameter
Net Weight: 252 g (8.9 oz), without batteries
Accessories Included: AT8456a Quiet-Flex™ stand clamp
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
(50 ohms termination)
Maximum Output Level:
XLR, balanced: +9 dBV,
¼" (6.3 mm), unbalanced: +4 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27") W x162.2 mm (6.39") D x44.0 mm (1.73") H,br>Not including BNC connectors or feet.
Weight: 1.0 kg (35.3 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Audio Output Attenuator (ATTN): Balanced Audio Output Attenuator: Two position switch: 0 / -12 dB